how to move electric seat manually

Steps to Manually Move an Electric Car Seat

If your electric car seat has lost power‚ there are several methods to manually adjust its position. These steps can help you regain control of your seat without relying on the car’s electrical system.

1. Use a Winder Tool or Drill: Attach a winder tool or a power drill to the motor’s shaft. Turn the tool clockwise to move the seat backward or counterclockwise to move it forward. This is a quick and effective temporary solution.
2. Loosen the Seat Bolts: Before attempting to move the seat‚ loosen the bolts that secure it to the floor. This will allow you to shift the seat more easily once you start adjusting it manually.



3. Check Electrical Connections: If the seat’s motor is not functioning‚ inspect the wiring and connections. Ensure all wires are securely attached and not damaged. Sometimes‚ tightening loose connections can restore partial functionality.



4. Reverse Wires for Direction Change: To change the direction of the seat’s movement‚ reverse the wires connected to the motor. For example‚ swapping the Light Blue and Tan wires can alter the motor’s rotation direction‚ allowing the seat to move forward or backward as needed.
5. Apply Physical Force: While pressing the adjustment lever‚ gently push the seat in the desired direction. This method works best if the motor still has some residual power but is unable to move the seat on its own.
6. Access the Motor Manually: Locate the horizontal motor underneath the seat‚ which controls the forward and backward movement. Use a screwdriver or your fingers to turn the motor’s shaft manually. This can be a slow process but is effective for precise adjustments.



7. Remove the Plastic Plate: At the front of the seat‚ you’ll find a plastic plate held in place by two screws; Remove these screws to access two gold-colored nuts. Adjusting these nuts can help reposition the seat manually.

By following these steps‚ you can manually adjust your electric car seat and restore comfort and accessibility to your vehicle. Always exercise caution when working with electrical components and consider consulting a professional if you’re unsure about any part of the process.